MRC Blogs — Drift Package

RSS
Wrap-Up Next Dual Composite Rear Shock Tower

Wrap-Up Next Dual Composite Rear Shock Tower 0

Earlier this year Wrap-Up Next released Dual Composite Rear Shock Tower for Yokomo YD-2 (Part Numbers: 0296-FD, 0297-FD, 0298-FD, and 0299-FD). It's unique detachable structure of the carbon and alum. design allows you to setup your shocks height and position more specifically for your needs.

In August, they announced a new version for Yokomo Drift Package based chassis which can also be used on FR-D, MR-D and NERVIS (Part Numbers: 0331-FD, 0332-FD, 0333-FD, 0334-FD), images shown below. Available early September 2017.

In addition, you can also change the detachable carbon piece to a different type, that allows you to accomplish different shock setup.

0327-FD Type-S Spare Shock Tower

(available early September 2017)

0328-FD Type-L Spare Shock Tower

(available early September 2017)

Yokomo YD-4MR AWD Drift Chassis

Yokomo YD-4MR AWD Drift Chassis 0

Yokomo flagship AWD drift chassis the YD-4 achieved its first victory at the D1:10 World Championships in Holland 2015, proving its amazing capability on any type of surface or track layout. It has continued to dominate at events around the world since its release last year. The YD-4MR was developed using feedback from some of the world best drivers and allows you to drive a mid-motor option of the original YD-4 to suits variety of drifting styles and skills that are required for different size and different characteristics of each track and your specific needs.

The YD-4MR will be available in a full kit or as an optional extra upgrade package for existing YD-4 owners. The mid mount motor gives different weight transfer characteristics with the LCG design in mind. It also improves the high speed snap/transition on high grip surfaces such as carpet.

Compared to the standard layout of the YD-4 which has excellent stability and high traction as standard. Designed for competition-minded drifters the YD-4 and YD-4MR.

Yokomo's high quality carbon fiber is still used throughout the chassis, upper deck and shock towers just as the original YD-4. The YD-4 series is a proven winner and now the mid motor option will allow this to continue pushing the boundaries of RC drift competition.

Specification

  • LCG design for quicker response and drift performance
  • Shaft drive 4WD with sealed gear box
  • High rigidity matt finish carbon fiber double deck chassis
  • Super low flex 4mm thick matt finish carbon fiber shock towers
  • Rear mid motor mount layout for dynamic weight shift and performance
  • Improved drivability by concentrating the weight mass in the center of the chassis
  • Maximum steering angle with reliable C-Hub design combined with low flex wishbones
  • Narrow scrub radius knuckles
  • Front one way included
  • FCD 1.3, Rear overdrive spool included
  • Alum. slide rack steering system for perfect steering angle and Ackerman adjustment
  • Chassis accepts standard and shorty battery pack with no additional parts

Wrap-Up Next All New Version of VX Suspension

Wrap-Up Next All New Version of VX Suspension 0

The 3rd version of VX suspension system!

Switching the ratio 1:1 shock mount and asymmetrical design knuckle allows you to mount the shock onto the suspension arm as the standard setting. The partitioning structure makes the suspension arm adjustable and multiple suspension pin attachments allows the most appropriate setting for your chassis, including the short suspension arm position.

The newly designed knuckles are usable for both 1060 bearings (Drift Package standard) and 1050(3mm width) bearings. Compatible with 5mm and 6mm diameter universal drive shafts.  Please note that using 6mm universal drive shaft will create some gaps on the sides. Gaps will be eliminated with the stainless shim set, which is also available for purchase.

Newly designed asymmetrical knuckles!

Reconsidered the positioning of service holes next to the knuckles to have the most appropriate accessary brake calipers attachment.

Reversing the knuckles makes wide range of settings possible. 2 positioning options of shock mounting (lever ratio 1:1 or standard)

The suspension mount axle is POM resin bush. Keep them fresh with periodic replacements. Bushes are replaceable with 2.5mm and 3mm according to the chassis type. The spare parts will also be available.

 

Overdose Trailing Angle Adjustable Suspension Arm

Overdose Trailing Angle Adjustable Suspension Arm 0

The suspension parts all the Drift Package users are waited for!

Trailing angle adjustable aluminum suspension arm for Drift Package!

All new trailing angle adjustable aluminum suspension arm for Drift Package. Previously only used for OD chassis, but this time OD made it available for Drift Package! Based on OD's original theory, rotating capability has been improved drastically, which allows the speedy drifting while keeping deep drifting angles.

The arm length is adjustable by 0.5mm pitch and adjusting scale by 5mm. You can have a variety of settings emphasizing on either traction or controls, if used with the wheel offsets.

It comes with the Drift Package specifically designed suspension mount. Colours will be available in blue, purple, red, gold, silver, pink and black.