MRC Blogs — Product News

MST RMX 2.0 KMW (Black Limited Edition)

MST RMX 2.0 KMW (Black Limited Edition) 0

MST have recently announced RMX 2.0 KMW Black Limited Edition which is the upcoming chassis kit scheduled to release in the end of 2018. According to the information from MST, this black limited edition RMX 2.0 KMW will have only 300 units made with unique serial number 001-300 on an aluminum plate which attach to the chassis deck. Also the whole machine will be delivered in a special car outer box. 

Obviously the RMX 2.0 KMW Black Limited Edition is based on RMX 2.0 plus all the upgrade parts. Comparing to a fully upgraded RMX 2.0, the KMW BLE has a newly designed KMW special carbon lower deck and carbon bumper support plus a KMW special aluminum number plate.

It's very interesting how MST name their products :) but unlike the VIP (high end) version chassis kit they have released in the past, this RMX 2.0 KMW Black Limited Edition is a true extreme edition. Over 35 aluminum upgrade parts are being hop onto the chassis, basically every MST upgrade part for RMX 2.0 you could think of will be seen on the RMX 2.0 KMW BLE. We will also include the upgrade part list later on in the post.


KMW special carbon lower deck 3.5mm

KMW special aluminum number plate

210610 New Carbon bumper support 2.5 L

210580BK RMX 2.0 Carbon upper deck 3.5 (black)

210577BK RMX 2.0 Alum. front damper stay (black)

210578BK RMX 2.0 Alum. rear damper stay (black)

210599BK RMX 2.0 Alum. head mount (black)

210598BK RMX 2.0 Alum. upper arm mount (black)

210601BK RMX 2.0 Alum. adj. front connect mount (black)

210589BK RMX 2.0 Alum. steering arm (black)

210590BK RMX 2.0 Alum. steering joint plate (black)

210588BK Alum. steering arm mount (black)

210575BK RMX 2.0 Alum. upper arm set (black)

820117BK Alum. front lower arm set (black)

820123BK ATK Alum. upright (2WD) (black)

210492 Alum. wheel hubs 6mm (large brake disc shaped

210594 MB Rear suspension kit

210604BK RMX 2.0 alum. rear gearbox (black)

210600BK RMX 2.0 Alum. bevel gear mount (black)

210584BK RMX 2.0 Alum. rear upper deck support (black)

210583BK RMX 2.0 Alum. motor mount (black)

210429BK RMX Alum. spur gear holder (black)

210461BK RMX Alum. spur gear cover (black)

210520 RMX Rear shaft ball diff. set

820120BK TR56 Alum. damper set (black) (4)

820046BK Alum. damper retainer (lower type) (4) (black)

820127BK Alum. 8-adjusting servo saver (black)

820125BK Alum. servo mount (black)

820129BK Alum. suspension mount (-2.0) (black) X2

820037BK Alum. suspension mount (+0.5) (black) X2

210561BK Alum. post M3X13 (black) X4

848075BK 48P Spur gear 75T (machined)

810007BK Alum. reinforced turnbuckle 3X20 (black) (2) X2

810008BK Alum. reinforced turnbuckle 3X25 (black) (2)

810010BK Alum. reinforced turnbuckle 3X32 (black) (2)

810013BK Alum. reinforced turnbuckle 3X44 (black) (2) 


No matter wether you are new or experienced driver looking for a good chassis or you just want to have another weapon in your collection. RMX 2.0 KMW Black Limited Edition is definitely one of the best choices out there. With it's capability and value, it will surely fulfil all your needs and perform the best job for you on the track!

We are now open for pre-orders both online and in-store. As usual, we offer early pre-order with discounted price which including free express shipping Australia wide. Pre-order it here

Wrap-Up Next KENBRO CONCEPT debut!

Wrap-Up Next KENBRO CONCEPT debut! 0

Wrap-Up Next have announced a new conversion kit few days ago, named KENBRO CONCEPT. Designed by the representative of IROHA Works, Mr. Ken Baku 研風呂.

KENBRO CONCEPT, adopted from the idea of combining Wrap-Up Next FR-D and MR-D, a new vertical rear mid motor chassis is born. The new design have been testing at the home track of IROHA Works, one of the best track in Japan. The new design has high turning/switching speed and excellent controllability thanks to the vertically mounted motor position while also maintaining optimal weight balancing for lateral anti-torque chassis on both high and low traction surfaces.

The main chassis is 2.0mm thick with moderate flexibility, and the upper deck adopts a split type 2.0mm thick pure carbon. The roll rigidity can be changed by rearrangement of the post of the upper deck connection corresponds to the various of track surface.

Wrap-Up Next is releasing three packages for KENBRO CONCEPT.

0401-FD KENBRO CONCEPT Conversion Kit

  • 2.0 mm pure carbon main chassis
  • Split type 2.0 mm pure carbon upper deck - Increase in cutting angle ST wiper adopted VX - DOCK Slide steering system
  • Drive transmission unit (18T x 2 / 35T / 40T)
  • Dedicated input shaft integral type center shaft
  • High mount motor plate
  • Upper deck mount x 2
  • 0272-FD graphite battery holder (for thin short LiPo battery)
  • Other posts and screws

Required separately for chassis completion

  • Long adjustable servo horn
  • Around the front and rear suspension (Susumu / Drift Package or YD series suspension mount / suspension arm / cantilever upper arm / knuckle / turnbuckle / ball end etc.)
  • Drift Package system rear shock tower
  • Front and rear oil shocks
  • Drift Package system gear box and gears

0402-FD KENBRO CONCEPT Conversion Kit VX-DOCK less specification

0403-FD KENBRO CONCEPT Conversion Kit VX - DOCK / drive mission less specification

0403-FD is recommended for converting MR-D to KENBRO CONCEPT. The kit includes:

  • main chassis / upper deck / High mount motor plate / centre shaft / battery holder / upper deck mount / Pin-on gear 35T / 40T / post thread, etc



  • Aluminum parts in all three packages are in black colour only
  • VX Gear bulkhead shown in the pictures is not included
  • All three packages are releasing end of November 2018
  • We are now taking pre-orders, find the pricing here
Acuvance XARVIS Firmware V3 Update

Acuvance XARVIS Firmware V3 Update 0

Acuvance have released the latest version of firmware V3 for XARVIS ESC. The updated firmware gives you Bluetooth capability with Brain Unit and the soon available new adapter "Air Link Adapter".

Acuvance Air Link Adapter for XARVIS (#OP15065)

By connecting this cable, you can use TAOII for XARVIS wirelessly through Acuvance Brain Unit. *It is necessary to update your XARVIS firmware to V3 to use this new Air Link Adapter.

So far, XARVIS ESC has the maximum number of revolutions to 100,000 RPM from the viewpoint of motor protection and safety. With V3 firmware upgrade, Acuvance have abolished this restriction. Along with the XARVIS V3 firmware update, Acuvance also released V1.45 firmware for TAOII. By updating TAOII to V1.45, the 100,000 RPM or more is converted to "real time data" of TAOII which you can see it in the function.


Sample when connecting XARVIS to Brain Unit via Air Link Adapter


For users who want to update your firmwares, we attached the download links in this article. Please find them below:


TAOII Program Device V1.45 firmware, DOWNLOAD

Acuvance (#OP15065) Air Link Adapter English Manual, DOWNLOAD

Wrap-Up Next Dual Composite Rear Shock Tower

Wrap-Up Next Dual Composite Rear Shock Tower 0

Earlier this year Wrap-Up Next released Dual Composite Rear Shock Tower for Yokomo YD-2 (Part Numbers: 0296-FD, 0297-FD, 0298-FD, and 0299-FD). It's unique detachable structure of the carbon and alum. design allows you to setup your shocks height and position more specifically for your needs.

In August, they announced a new version for Yokomo Drift Package based chassis which can also be used on FR-D, MR-D and NERVIS (Part Numbers: 0331-FD, 0332-FD, 0333-FD, 0334-FD), images shown below. Available early September 2017.

In addition, you can also change the detachable carbon piece to a different type, that allows you to accomplish different shock setup.

0327-FD Type-S Spare Shock Tower

(available early September 2017)

0328-FD Type-L Spare Shock Tower

(available early September 2017)