Wrap-Up Next KENBRO CONCEPT debut!

RSS
Wrap-Up Next KENBRO CONCEPT debut!

Wrap-Up Next have announced a new conversion kit few days ago, named KENBRO CONCEPT. Designed by the representative of IROHA Works, Mr. Ken Baku 研風呂.

KENBRO CONCEPT, adopted from the idea of combining Wrap-Up Next FR-D and MR-D, a new vertical rear mid motor chassis is born. The new design have been testing at the home track of IROHA Works, one of the best track in Japan. The new design has high turning/switching speed and excellent controllability thanks to the vertically mounted motor position while also maintaining optimal weight balancing for lateral anti-torque chassis on both high and low traction surfaces.

The main chassis is 2.0mm thick with moderate flexibility, and the upper deck adopts a split type 2.0mm thick pure carbon. The roll rigidity can be changed by rearrangement of the post of the upper deck connection corresponds to the various of track surface.

Wrap-Up Next is releasing three packages for KENBRO CONCEPT.

0401-FD KENBRO CONCEPT Conversion Kit

  • 2.0 mm pure carbon main chassis
  • Split type 2.0 mm pure carbon upper deck - Increase in cutting angle ST wiper adopted VX - DOCK Slide steering system
  • Drive transmission unit (18T x 2 / 35T / 40T)
  • Dedicated input shaft integral type center shaft
  • High mount motor plate
  • Upper deck mount x 2
  • 0272-FD graphite battery holder (for thin short LiPo battery)
  • Other posts and screws

Required separately for chassis completion

  • Long adjustable servo horn
  • Around the front and rear suspension (Susumu / Drift Package or YD series suspension mount / suspension arm / cantilever upper arm / knuckle / turnbuckle / ball end etc.)
  • Drift Package system rear shock tower
  • Front and rear oil shocks
  • Drift Package system gear box and gears

0402-FD KENBRO CONCEPT Conversion Kit VX-DOCK less specification

0403-FD KENBRO CONCEPT Conversion Kit VX - DOCK / drive mission less specification

0403-FD is recommended for converting MR-D to KENBRO CONCEPT. The kit includes:

  • main chassis / upper deck / High mount motor plate / centre shaft / battery holder / upper deck mount / Pin-on gear 35T / 40T / post thread, etc

 

Note: 

  • Aluminum parts in all three packages are in black colour only
  • VX Gear bulkhead shown in the pictures is not included
  • All three packages are releasing end of November 2018
  • We are now taking pre-orders, find the pricing here

Previous Post Next Post

  • MRC Plaza
Comments 0
Leave a comment
Your Name:*
Email Address:*
Message: *

Please note: comments must be approved before they are published.

* Required Fields