Yokomo Super Drift SD 1.0 LTS Assembly Chassis Kit

Newly released Yokomo SD 1.0 Load Transfer Special assembly chassis kit which based on the SD1.0 chassis, it has been modified to bring out the roll, and by changing the shock weight balance and roll centre, it has become possible to drive in an attractive way. The flexible suspension conveys the driver's intentions to the road surface, and the realism spreads to the extent that you can smell the tyre smoke.

By shifting the load, the traction of the front tyres are increased, approaching the corners, and the weighty behavior and the dynamism created by the rolls create an ultra-realistic drift.

The position of the centre of gravity has been changed significantly compared to the conventional model, and heavy objects are intentionally placed at a higher position, resulting in a balance that allows a large roll even with low tyre grip.

SD1.0 LTS uses resin-made vehicle height adjustable oil damper. The springs are long and multi-layered to create a supple undercarriage that utilizes rebound.

The steering system adopts a wiper type. Longer tie rods suppress toe changes due to suspension stroke and bring out a mild operation feeling.

High mount upper arm that optimizes front and rear roll balance and pitching motion when entering a corner.

The aluminum main chassis with bevel edge processing creates a sense of stability.

LTS's most distinctive high mount battery. Along with the motor mounting position, the center of gravity is raised to induce load transfer even when the grip is low.

The battery tray can be slid forward and backward, and the weight balance in the forward and backward direction can be adjusted along with the motor position.

The front and rear shock towers are made of aluminum. Widen the range of shock mounting positions and make effective use of the long spring characteristics.

The 3-gear gearbox can be accessed by simply removing the rear cap. The design is also highly maintainable.